Felt Wall Art

Art can be expensive, and painting your own art is hard. Fortunately making felt wall art is super easy, and cheap too! Check out the tutorial below to learn how.

il_fullxfull-633516376_rlao

il_fullxfull-396326096_8vp3

Step 1: Get Some Felt

Cut at least two pieces of felt the same size. Four will be used for the purpose of this tutorial.

Step 2: Find Your Patterns

Choose a shape or silhouette and size it to be slightly smaller than your felt pieces. Print the shapes.

Step 3: Cut Them Out

Cut out the shapes.

Step 4: Attach Patterns to Felt

Place the cut-out face down on what will be the back side of one of the felt pieces. Be sure to choose the color that will be more prominently seen on your finished wall art. Trace the shape with a fine tip sharpie or anything else that will show up on your felt. Try not to use a wide tip marker since it may bleed through the felt.

Step 5: Cut Out Shapes From the Felt

Cut the shapes out of the felt. Do not cut into the shape but cut from the inside out as the middle part will be discarded.

Step 6: Apply Glue

Using fabric glue or an all-purpose craft glue that dries clear, draw a line around all of the cut edges. Then place the other piece of felt onto the back of your cut piece.

Step 7: Combine Your Felt Pieces

Turn the pieces over and press around all the edges. Don’t worry if some of the glue bleeds through or can be seen through the felt since the glue will dry clear.

Step 8: Add a String

Before the glue dries, peal up the top two corners and glue a ribbon or string in between the layers.

Step 9: Let the Glue Dry

Do not attempt to hang your wall art until the glue dries completely!

Step 10: Hang it Up

Find a nice place to hang it, and show it off to the world!